نتایج جستجو برای: Ethanol flow rate

تعداد نتایج: 1472236  

Journal: :journal of sciences, islamic republic of iran 2015
m. makenali r. ajeian m. tavakkoli m. nakhaee badrabadi s. panahian jand

here, we have synthesized vertically aligned carbon nanotubes (va-cnts), using chemical vapor deposition (cvd) method. cobalt and ethanol are used as the catalyst and the carbon source, respectively. the effects of ethanol flow rate, thickness of co catalyst film, and growth time on the properties of the carbon nanotube growth are investigated. the results show that the flow rate of ethanol and...

M. Makenali M. Nakhaee Badrabadi M. Tavakkoli M. Zare R. Ajeian S. Panahian Jand

Here, we have synthesized vertically aligned carbon nanotubes (VA-CNTs), using chemical vapor deposition (CVD) method. Cobalt and ethanol are used as the catalyst and the carbon source, respectively. The effects of ethanol flow rate, thickness of Co catalyst film, and growth time on the properties of the carbon nanotube growth are investigated. The results show that the flow rate of ethanol and...

The potential bioconversion of synthesis gas (syngas) to fuels and chemicals by microbial cell has attracted considerable attention in past decade. The feasibility of enhancing syngas bioconversion to ethanol and acetate using Clostridium ljungdahlii in a continuous tank bioreactor (CSTBR), kinetics and mass transfer coefficient of carbon monoxide (CO) utilization were evaluated. Two different ...

2017
Muhammad Arshad Tariq Hussain Munawar Iqbal Mazhar Abbas

Very high gravity (VHG) technology was employed on industrial scale to produce ethanol from molasses (fermented) as well as by-products formation estimation. The effect of different Brix° (32, 36 and 40) air-flow rates (0.00, 0.20, 0.40, and 0.60vvm) was studied on ethanol production. The maximum ethanol production was recorded to be 12.2% (v/v) at 40 Brix° with 0.2vvm air-flow rate. At optimum...

Journal: :British heart journal 1990
M Kupari P Koskinen M Hynynen M Salmenperä M Ventilä

Transmitral flow velocities were measured by Doppler echocardiography in nine healthy men who ingested 1 g/kg of ethanol within one hour. The measurements were made before the first drink and every hour thereafter for three hours. The peak mean (SE) blood ethanol concentration was 21.4 (1.0) mmol/l. Each man was also studied after drinking fruit juice. Ethanol increased the heart rate but did n...

پایان نامه :وزارت علوم، تحقیقات و فناوری - دانشگاه سیستان و بلوچستان - دانشکده مهندسی 1392

flow in natural river bends is a complex and turbulent phenomenon which affects the scour and sedimentations and causes an irregular bed topography on the bed. for the reason, the flow hydralics and the parameters which affect the flow to be studied and understand. in this study the effect of bed and wall roughness using the software fluent discussed in a sharp 90-degree flume bend with 40.3cm ...

2009
Kyung-ho Ahn Anna G. Stefanopoulou Mrdjan Jankovic

Flexible fuel vehicles (FFVs) can operate on a blend of ethanol and gasoline in any volumetric concentration of up to 85% ethanol (93% in Brazil). Existing FFVs rely on ethanol sensor installed in the vehicle fueling system, or on the ethanoldependent air-to-fuel ratio (AFR) estimated via an exhaust gas oxygen (EGO) or λ sensor. The EGO-based ethanol detection is desirable from cost and mainten...

Journal: :The Analyst 1988
W A de Oliveira C Pasquini

A flow injection enthalpimetric method for the determination of ethanol in fuel-grade ethanol, based on the heat of dilution of ethanol, is described. The accuracy and precision were 0.05% of ethanol; interferences by several substances are discussed. A similar procedure was also applied to the determination of ethanol in wines and spirits after distillation, yielding a precision of 0.0%0.1% of...

2014
Muhammad Mansoor Muhammad Shahid Amir Habib

During synthesis of MWCNTs using CVD, role of carbonaceous material and catalyst, besides other process parameters, has considerable influence on the structure and yield of pristine nanotubes. In present study, different flow rates (i.e. 10, 25, 40 and 55 sccm) of precursor ethanol were used for the synthesis of MWCNTs at 750 °C in a CVD reactor, where nickel particles were supported on quartz ...

Nanostructured TiO2-SnO2 thin-film ethanol sensors have been fabricated on glass substrates using electron beam and sol-gel methods. The surface structure, morphology and optical transmission characteristics of the films were analyzed by X ray diffraction, scanning electron microscopy and UV/VIS/NIR spectrometry. The TiO2-SnO2 films were less than 300 nm thick and consisted of nanocrystallines ...

نمودار تعداد نتایج جستجو در هر سال

با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید